元器件交易网www.cecb2b.com
AZ76925 AMPMINIATURE POWER RELAYFEATURES•••••••Low cost25 Amp switching80 Amp inrush currentQuick connect and PCB terminalsFlux tight constructionUL, CUR file E44211TÜV file R50069399CONTACTS
ArrangementRatings
SPST (1 Form A)Resistive load:
Max. switched power: 600 W or 6925 VAMax. switched current: 25 A
Max. switched voltage: 150 VDC* or 400 VAC
* Note: If switching voltage is greater than 30VDC,
GENERAL DATA
Life Expectancy
MechanicalElectricalOperate Time (typical)Release Time (typical)
Minimum operations2 x 106
1 x 105at 25 A 250 VAC Res.20 ms at nominal coil voltage10 ms at nominal coil voltage(with no coil suppression)
special precautions must be taken.Please contact the factory.
Rated LoadUL, CUR
25 A at 277 VAC resistive 100k cycles [1] [2]1 HP at 120 VAC, 100k cycles [1] [2]2 HP at 240 VAC, 100k cycles [2]2 HP at 240 VAC, 30k cycles [1]25 A at 250 VAC resistive [1]
Silver cadmium oxide [1] or silver tin oxide [2]< 50 milliohms initially
(24 V, 1 A voltage drop method)
Dielectric Strength4500 Vrms coil to contact
(at sea level for 1 min.)1500 Vrms between open contacts
10,000 V surge contact to coilInsulationResistanceDropout
1000 megohms min. at 20°C, 500 VDC,50% RH
Greater than 10% of nominal coil voltageAt nominal coil voltage
-40°C (-40°F) to 70°C (158°F)-40°C (-40°F) to 105°C (221°F)0.062\" (1.5 mm) DA at 10–55 Hz
TÜVMaterialResistance
Ambient Temperature
OperatingStorageVibrationShock
COIL
Power
At Pickup Voltage(typical)
Max. ContinuousDissipationTemperature RiseTemperature
441 mW
2.25 W at 20°C (68°F) ambient45°C (81°F) at nominal coil voltageMax. 130°C (266°F)
Operating20 g, 11 ms, 1/2sine (no false operation)Non-Operating100 g, 11 ms, 1/2sine (no damage)
EnclosureTerminals
P.B.T. polyesterTinned copper alloyP.C. & quick connect
Note: Allow suitable slack on leads when wiring
and do not subject the terminals toexcessive force.
Max. Solder Temp.Max. Solder TimeWeight
270°C (518°F)5 seconds23 grams
50 per plastic tray / 500 per carton box
NOTES
1.All values at 20°C (68°F).
2.Relay may pull in with less than “Must Operate” value.3.Specifications subject to change without notice.
Packing unit in pcs
ZETTLERelectronics GmbH2005-12-05
Tel. +49 800 97 0 office@ZETTLERelectronics.com Junkersstrasse 3, D-82178 Puchheim, Germany Fax +49 800 97 200 www.ZETTLERelectronics.com元器件交易网www.cecb2b.com
AZ769RELAY ORDERING DATA
COIL SPECIFICATIONS - QUICK CONNECT TERMINALS
Nominal Coil
VDC5
1224
Must Operate
VDC3.5
8.416.8
Max. Continuous
VDC7.9
19.037.9
Coil ResistanceOhm ± 10%
27.8
1600
ORDER NUMBER*
Form A(SPST)AZ769–1A–5DAZ769–1A–12DAZ769–1A–24D
COIL SPECIFICATIONS - PCB TERMINALS
Nominal Coil
VDC5
1224
Must Operate
VDC3.5
8.416.8
Max. Continuous
VDC7.9
19.037.9
Coil ResistanceOhm ± 10%
27.8
1600
ORDER NUMBER*
Form A(SPST)AZ769–1A–5DKAZ769–1A–12DKAZ769–1A–24DK
* Add suffix “E” to “1A” for silver tin oxide contacts.
MECHANICAL DATAPCB & QUICK CONNECT VERSION PCB VERSION.240 [6.1].748 [19.0]1.201 MAX. [30.5].630 MAX. [16.0].031 [0.79]1.201 MAX. [30.5].630 MAX. [16.0]2 x .250 [6.35]2 x .394 [10.0]1.043 MAX. [26.5].925 [23.5].925 MAX. [23.5]4 x .031 [0.8]4 x .138 [3.5]PC BOARD LAYOUT4 x .031 [0.8]2 x .032 [0.81]2 x .059 [1.5]4 x .138 [3.5](Typical for both versions)1.087 [27.6]WIRING DIAGRAM(Typical for both versions).150 [3.8].069 [1.75]4.472 [12.0]32 x .012 [0.3]2 x .059 [1.5]4 x ø.071 [ø1.8].866 [22.0].057 [1.45]12Viewed toward terminalsViewed toward terminalsDimensions in inches with metric equivalents in parentheses. Tolerance: ± .010\"
ZETTLERelectronics GmbH2005-12-05
Tel. +49 800 97 0 office@ZETTLERelectronics.com Junkersstrasse 3, D-82178 Puchheim, Germany Fax +49 800 97 200 www.ZETTLERelectronics.com